TITAN POWER HF
High frequency electric disc wall saw
Wall disc saw for cutting operations up to 680 mm.
For quick and precise cutting of reinforced concrete, stone and mixed masonry, with disc machine with high frequency technology for professional use only.
The Titan Power HF wall saw is a latest generation machine designed and designed with high frequency technology. Titan Power is built with transmission gears that allow the electric motor to give the machine as much power as possible. The low speed of the engine (6000' per min) reduces maintenance to a minimum. The quick disassembly system of the motor; disk drive offers the operator the possibility to significantly reduce the weights during the machine moving or installation phases. The machine runs on very sturdy steel rails and is controlled in all its functions by a shoulder control with 10 meters of cable. Titan Power HF equipped with a special flange can cut flush to the wall. Note that the machine is equipped as standard with a fully automatic system (which can be used by the operator) that regulates the speed of movements (feed and displacement) and cutting, according to the hardness of the material to be cut. This allows you not to lock the disc during cutting. The machine is addressed to the professional user who wants to equip himself with a machine of last generation but at the same time of easy mechanical maintenance.
Ideal machine for cutting operations up to 680 mm with 22 kW control unit.
Max. cutting depth: 680 mm
Usable disc diameter: from 800 mm to 1500 mm
Max diameter of the disc can be used without pre-cut: 800 mm
Disc drive motor: integrated high frequency
Control unit: high frequency 11/18/22/26 kw
Controls: shoulder push-button panel
Cutting head weight: 27 kg + 14 kg (motor)
- Cutting head with 800 mm casing
- Shoulder control with 10 meters of cable
- Rail length 2250 mm
- Rail length 1500 mm
- Foot rail support (4 pieces)
- High frequency control unit 11/18/22/26 kw